Treadle Make Tuesday: Sarah's Wedding Dress

Every Tuesday we share projects from Treadle Yard Goods employees (a.k.a. The Treadlettes) and our customers and fans!

This week's make comes from Treadlette Elizabeth. Last summer she sewed a wedding dress for her friend Sarah.

Sarah was ready with sketches and a vision for her dress: lots of floaty dark tulle over a gown of pale lavender, with just a little sparkle. A fitted, figure-flattering bodice with loads of swishy skirt and just a little floof!

Supporting some of that floof is a ruffled, tucked petticoat in crisp cotton broadcloth that Elizabeth made to go with the dress. 

This was a big project that took multiple fittings and tweaks to get just right. A wedding dress always feels pretty high stakes, even when it's non-traditional.

Want to be featured on Treadle Make Tuesday? Send us a photo or tag us in your post! (We will always ask before we share.)

Friday Fun Fact: More presser feet!

Let's check out some more presser feet!

Last time we looked at some common presser feet, and this week we have a couple more - plus a couple odd ones!

First up are zipper feet. There is a tremendous variety of shapes and sizes! But the defining element is that the needle passes to the SIDE of the foot, not through the center.

This enables you to stitch very close to the zipper teeth. It's also necessary for making piping or any time you need to sew really close to something bulky.

Also note that some zipper feet are adjustable, while others rely on your machine's ability to move the needle position.

The two feet with little arms and wheels are blind-hem feet. The arm is a guide that helps you line up your fabric perfectly to sew a nearly-invisible hem with your blind-hem stitch.

They're also useful for topstitching, as the guide can be positioned to any edge you need.

Next are two roller feet. This is a specialty foot that allows you to sew sticky fabrics like leather and oilcloth more easily. Rather than dragging against the presser foot, the rollers allow the sticky fabric to feed.

Finally, this huge monster is a walking foot, also known as an even-feed foot. This feeds the fabric from the top in synchrony with the feed dogs, to reduce slippage. It's ideal for difficult fabrics, knits, or any time you have a lot of layers, like quilting. These can be a little pricey and usually do not come standard with your sewing machine.

Do you have a mystery presser foot you want identified? Send us a picture!

Check out all our Friday Fun Facts in the archive here!

Treadle Make Tuesday: Shawn's Linen Coat

It's something NEW! Every Tuesday we've been sharing projects from Treadle Yard Goods employees (a.k.a. The Treadlettes!) and while that's been a ton of fun, we want to expand.

Now we're also sharing projects made by YOU!

If you follow us on Instagram, you might be aware of the #mytreadlemake tag. Anyone can use this tag to share something they're made with our fabric, buttons, or notions, in our classes, or just with our advice and support!

Shawn made this fantastic coat over the course of a few classes with us at Treadle.

She used one of our gorgeous linens, paired with a small amount of Liberty Tana Lawn print for some adorable hidden details! 

The pattern is the Merchant and Mills September coat, and this is Shawn's second version of it! 

Friday Fun Fact: What's that presser foot?

Today we're doing a round of everyone's favorite game: What's that presser foot?

Your machine probably came with a bunch of presser feet, or maybe you inherited a big old sewing box full of weird old stuff, including some mystery feet. Let's explore some of them!

Depending on the machine, the way the feet attach might be quite different - such as snap-on vs. with a shank -  but the basic function stays the same.

First you'll see a selection of ordinary all-purpose feet. They have a wide oval center to allow for zigzag stitching and multiple needle positions.

Next we have two straight-stitch feet. These are handy for sewing delicate fabrics. When paired with a straight-stitch throat plate, they can really help prevent fabric getting sucked into the machine!

Also note that some straight stitch feet are made for measuring accurate 1/4" seams, and some aren't. Measure your foot to be sure!

Most machines need a special foot to make buttonholes. If it's a big long rectangle, it's probably your buttonhole foot! You need the correct one for your machine to make the buttonhole function work, especially on modern machines with 1-step buttonholes.

Finally, we've got these weird little blue guys. They're meant for sewing buttons on by machine! You set your stitch to a wide, very short zigzag and place the button under the foot. The rubbery blue bit helps hold the button in place while you sew.

There are tons of presser feet out there, so we'll be exploring more of them in an upcoming Fun Fact!

Check out all our Friday Fun Facts in the archive here!

Treadle Make Tuesday: Sabrina's Scout Tee

Check out this sweet share from Instagram. Sabrina made this cute linen top from the Scout Tee pattern with one of our lovely checked linens.

See her post here!

Friday Fun Fact: Hand vs. Machine needle sizing

This question came up in the store the other day: Why are hand sewing needles sized differently from machine needles?

Hand sewing needles have been made for thousands of years, and the kind we are familiar with are based on wire. First you make the metal into wire, then you flatten one end and punch a hole. That's a needle!

Because they started out as wire, hand sewing needles use a sizing system similar to wire gauge sizes.

The important thing with hand needles: bigger number = smaller needle.

In the pack of needles pictured, the size 3 are the big ones in the middle, and the size 9 are the little ones on the ends. 

Machine sewing needles are the opposite: bigger number = bigger needle! 

And if that's not confusing enough, there are two different systems for sizing machine needles! That's why we get numbers like 80/12 and 90/14.

 The Schmetz website explains:

SCHMETZ is a German company and uses the metric system.  To determine needle size, SCHMETZ measures the diameter of the blade resulting in numbers like 80, 90, etc...  But SCHMETZ is not the only needle manufacturer.  Other companies use sizing systems often referred to as Asian, International, or Singer sizing.  Years ago the needle manufacturers standardized the sizing so a metric size 80 always equals a size 12, 90 = 14, etc.

We hope that clears it up for you!

There's more to choosing the right needle than the size! Click here to see our post on needle selection!

Treadle Make Tuesday: Bethany's Wedding Dress

It's something NEW! Every Tuesday we've been sharing projects from Treadle Yard Goods employees (a.k.a. The Treadlettes!) and while that's been a ton of fun, we want to expand.

Starting this week, we're also sharing projects made by YOU!

If you follow us on Instagram, you might be aware of the #mytreadlemake tag. Anyone can use this tag to share something they're made with our fabric, buttons, or notions, in our classes, or just with our advice and support!

This week we're sharing an amazing handmade wedding dress from Bethany @putteringwithpaper. 

She used the Cashmerette Upton pattern paired with our silk noil and hand-embroidered the floral designs. 

See the full post with all the details here at her Instagram!

Want to be featured? Share your make with us on Instagram, Facebook, by email, or just stop by the store! We will always ask your permission before we share.

Friday Fun Fact: Triple Zigzag Stitch

Yay, Friday Fun Facts are BACK after our holiday hiatus!

Today I'm sharing one of my favorite stitches with you: the triple zigzag.

In a basic zigzag stitch, the needle makes one stitch for each leg of the zigzag. In the triple zigzag stitch, there are three stitches in each leg.

Most machines made in the last 30 years have this stitch! The stitch selector below is from our Eversewn Jasmine - see the triple zigzag in the circle?



Here's why this stitch is so helpful to us: less tunneling, less waving, and more stretch. Let's explore that!

Tunneling is what happens when a zigzag stitch draws up in a fold, creating a ridge (or "tunnel") in the center of the stitch line. The triple zigzag doesn't do that!

Check out the orange sample below with seam allowances pressed open - the seam allowance on the left is finished with a traditional zigzag, while the one on the right is finished with the triple. Generally the triple gives you a smoother, flatter finish.

On a sturdy fabric, this is less noticeable, but the difference becomes more apparent on a delicate fabric. The same two edge finishes were applied to the gauzy white fabric - regular zigzag on the left, triple on the right.

Can you see how the regular zigzag crumples the fabric's edge? In this case, the triple is the best choice!

Triple zigzag is also a great choice for hemming knits! If you've experienced waving or "potato chip edge" while hemming knits, try the triple zigzag for a nice flat finish!

Plus, this stitch has way more stretch to it than the regular zigzag, making it perfect for tight hems, like at the bottoms of snug leggings. You won't pop a stitch out when you stretch that hem!

Read all our previous Friday Fun Facts here at our blog!